Biological conversion pathways of sulfate reduction ammonium oxidation in anammox consortia

• The SRAO phenomena tended to occur only under certain conditions. • High amount of biomass and non-anaerobic condition is requirement for SRAO. • Anammox bacteria cannot oxidize ammonium with sulfate as electron acceptor. • AOB and AnAOB are mainly responsible for ammonium conversion. • Heterotrophic sulfate reduction mainly contributed to sulfate conversion. For over two decades, sulfate reduction with ammonium oxidation (SRAO) had been reported from laboratory experiments. SRAO was considered an autotrophic process mediated by anammox bacteria, in which ammonium as electron donor was oxidized by the electron acceptor sulfate. This process had been attributed to observed transformations of nitrogenous and sulfurous compounds in natural environments. Results obtained differed largely for the conversion mole ratios (ammonium/sulfate), and even the intermediate and final products of sulfate reduction. Thus, the hypothesis of biological conversion pathways of ammonium and sulfate in anammox consortia is implausible. In this study, continuous reactor experiments (with working volume of 3.8L) and batch tests were conducted under normal anaerobic (0.2≤DO<0.5 mg/L) / strict anaerobic (DO<0.2 mg/L) conditions with different biomass proportions to verify the SRAO phenomena and identify possible pathways behind substrate conversion. Key findings were that SRAO occurred only in cases of high amounts of inoculant biomass under normal anaerobic condition, while absent under strict anaerobic conditions for same anammox consortia. Mass balance and stoichiometry were checked based on experimental results and the thermodynamics proposed by previous studies were critically discussed. Thus anammox bacteria do not possess the ability to oxidize ammonium with sulfate as electron acceptor and the assumed SRAO could, in fact, be a combination of aerobic ammonium oxidation, anammox and heterotrophic sulfate reduction processes.     

Enhanced debromination of 2,2′,4,4′-tetrabromodiphenyl ether (BDE-47) by zero-valent zinc with ascorbic acid

• Highly efficient debromination of BDE-47 was achieved in the ZVZ/AA system. • BDE-47 debromination by the ZVZ/AA can be applied to a wide range of pH. • AA inhibits the formation of (hydr)oxide and accelerates the corrosion of ZVZ. • Reduction mechanism of BDE-47 debromination by the ZVZ/AA system was proposed. A new technique of zero-valent zinc coupled with ascorbic acid (ZVZ/AA) was developed and applied to debrominate the 2,2′,4,4′-Tetrabromodiphenyl ether (BDE-47), which achieved high conversion and rapid debromination of BDE-47 to less- or non-toxic forms. The reaction conditions were optimized by the addition of 100 mg/L ZVZ particles and 3 mmol/L AA at original solution pH= 4.00 using the solvent of methanol/H₂O (v:v= 4:6), which could convert approximately 94% of 5 mg/L BDE-47 into lower-brominated diphenyl ethers within a 90 min at the ZVZ/AA system. The high debromination of BDE-47 was mainly attributed to the effect of AA that inhibits the formation of Zn(II)(hydr)oxide passivation layers and promotes the corrosion of ZVZ, which leads to increase the reactivity of ZVZ. Additionally, ion chromatography and gas chromatography mass spectrometry analyses revealed that bromine ion and lower-debromination diphenyl ethers formed during the reduction of BDE-47. Furthermore, based on the generation of the intermediates products, and its concentration changes over time, it was proposed that the dominant pathway for conversion of BDE-47 was sequential debromination and the final products were diphenyl ethers. These results suggested that the ZVZ/AA system has the potential for highly efficient debromination of BDE-47 from wastewater.     

Degradation of polyacrylamide (PAM) and methane production by mesophilic and thermophilic anaerobic digestion: Effect of temperature and concentration

• PAM degradation in thermophilic AD in comparison with mesophilic AD. • PAM degradation and its impact on thermophilic and mesophilic AD. • Enhanced methane yield in presence of PAM during thermophilic and mesophilic AD. • PAM degradation and microbial community analysis in thermophilic and mesophilic AD. Polyacrylamide (PAM) is generally employed in wastewater treatment processes such as sludge dewatering and therefore exists in the sludge. Furthermore, it degrades slowly and can deteriorate methane yield during anaerobic digestion (AD). The impact or fate of PAM in AD under thermophilic conditions is still unclear. This study mainly focuses on PAM degradation and enhanced methane production from PAM-added sludge during 15 days of thermophilic (55°C) AD compared to mesophilic (35°C) AD. Sludge and PAM dose from 10 to 50 g/kg TSS were used. The results showed that PAM degraded by 76% to 78% with acrylamide (AM) content of 0.2 to 3.3 mg/L in thermophilic AD. However, it degraded only 27% to 30% with AM content of 0.5 to 7.2 mg/L in mesophilic AD. The methane yield was almost 230 to 238.4 mL/g VSS on the 8th day in thermophilic AD but was 115.2 to 128.6 mL/g VSS in mesophilic AD. Mechanism investigation revealed that thermophilic AD with continuous stirring not only enhanced PAM degradation but also boosted the organics release from the sludge with added PAM and gave higher methane yield than mesophilic AD.     

“竞争申请制”:可持续发展政策试点与央地关系重构

可持续发展目标(SDGs)的提出,开启了人类可持续发展领域最宏大的政策实验,也为开展国际视野的比较公共政策研究提供了难得机遇。执行SDGs及国家可持续发展政策需要处理好中央政府与地方政府间关系,而政策试点是协调这一关系的重要政策工具。已有文献对经济政策试点做了较充分的研究,然而对旨在实现经济、社会与环境协调的可持续发展政策试点,现有研究尚缺乏成型理论。在复杂央地关系格局下,对于需持续投入成本且成果难以界定的可持续发展政策试点,其具有怎样的不同于经济政策试点的机制?此外,众多西方学者将美国作为政策试点研究的制度基础并视其为“民主实验室”。然而,政策试点在以中国为代表的不同体制国家中同样存在,并以多样的机制发挥作用。那么,不同国家体制内的可持续发展政策试点又有哪些异同?政策试点影响下中国既有的央地关系发生了怎样的重构?对此,本文基于最典型案例原则,选取中国与美国响应SDGs分别开展的政策试点进行比较研究。笔者识别了不同体制下试点机制的异同,指出中国基于“竞争申请制”开展的可持续发展政策试点强化了中央部委与地方政府间关系,形成了地方官员的可持续发展激励,保障了政策试点的实施。     

“三线一单”促进四川省高质量发展

过去40年来我国经济建设取得了举世瞩目的成绩,但是也留下了很多生态环境问题。目前我国经济已经由高速增长阶段转向高质量发展阶段,但高质量发展缺乏指标体系和具体路径。“三线一单”是一套生态环境分区管控体系,其主要目的是统筹地方社会经济与环境保护的矛盾,促进经济结构转型。四川省在“三线一单”编制过程中,通过建立指标体系从生态环境保护的角度为地区高质量发展提供了量化标准,通过差异化管控要求为地区高质量发展提供了具体路径,从生态环境角度助力高质量发展。     

基层环境统计年报中的问题及建议

环境统计工作是环境保护工作中的基础,是各级政府和环境保护行政主管部门制定环境保护政策和计划、加强环境监督管理和污染防治的重要依据。本文结合日常工作经验,就目前基层环境统计工作中存在的问题进行探讨,并提出一些建议。     

Inherent thermal runaway hazard evaluation method of chemical process based on fire and explosion index

Thermal runaway hazard assessment provides the basis for comparing the hazard levels of different chemical processes. To make an overall evaluation, hazard of materials and reactions should be considered. However, most existing methods didn't take the both into account simultaneously, which may lead the assessment to a deviation from the actual hazard. Therefore, an integrated approach called Inherent Thermal-runaway Hazard Index (ITHI) was developed in this paper. Similar to Dow Fire and Explosion Index(F&EI) function, thermal runaway hazard of chemical process in ITHI was the product of material factor (MF) and risk index (RI) of reaction. MF was an indicator of material thermal hazards, which can be determined by initial reaction temperature and maximum power density. RI, which was the product of probability and severity, indicated the risk of thermal runaway during the reaction stage. Time to maximum rate under adiabatic conditions and criticality classes of scenario were used to indicate the runaway probability of the chemical process. Adiabatic temperature rise and heat of the desired reaction and secondary reaction were used to determine the severity of runaway reaction. Finally, predefined hazard classification criteria was used to classify and interpret the results obtained by this method. Moreover, the method was validated by case studies.     

Misoperation monitoring and early warning during startup and shutdown of petrochemical units

Most petrochemical units run under extreme conditions, such as high temperatures, pressures, and speeds. Consequently, the equipment operators may commit errors because the startup and shutdown processes usually involve complicated operation steps; moreover, the operators may lack experience in handling abnormal situations. Misoperation can lead to accidents, including fires and explosions. Thus, risk analysis for process operations and the development of preventive measures have become an effective means of avoiding misoperation-related accidents. However, it is challenging to ensure the comprehensiveness of risk-analysis results. In this paper, we present a method for misoperation monitoring and early warning in the startup and shutdown processes of petrochemical units. The mechanisms of misoperation occurrence are summarized based on investigations of serious accidents in the recent past. Knowledge regarding the mechanisms of misoperation is crucial for the risk analysis of petrochemical units. The potential risk information, such as causes, adverse consequences, key monitoring parameters, and prevention control solutions, should be acquired and be employed to construct an early-warning knowledge database. Furthermore, misoperation judgment rules need to be formulated to identify misoperations. The data obtained from the monitoring module, misoperation judgment rules, and analysis results can aid in developing schemes to avoid possible abnormal situations. This paper reports a misoperation monitoring and early-warning system for a hydrogenation unit. As demonstrated, conducting risk analysis to determine the potential operational risks and formulating misoperation judgment rules to analyze the process data are essential for enabling early warning. The application of this method will contribute to operational guidance, economic loss reduction, and accident avoidance.     

基于云模型的高校消防安全标准化评估研究

为评估高校消防安全标准化程度,明确高校消防安全标准化体系,结合高校消防安全标准化体系的模糊性,将高校消防安全标准化等级划分为5个级别,采用黄金分割法将权重云、评价云划分成5个云模型,建立能够反映高校消防安全标准化等级模糊性的云模型。该模型运用于某高校消防安全标准化等级评估中,评估结果客观合理,实用性较强,为后续标准化提升提供了参考依据。     

液氮泡沫发生器内流动特性研究

低温液氮与泡沫混合液直接接触产生氮气泡沫是一种新型的掺混形式,利用液氮高汽化比的特点,搭建液氮泡沫可视化实验装置,进行氮气-水两相流及液氮泡沫流动特性的研究。结果表明,液氮相变产生大量氮气,其与泡沫液混合产生泡沫,温度有所回升,最终趋于泡沫混合液温度;管路沿程压降较小;液氮射流破碎及流动过程可分为6个区域:低温液氮区、向上循环翻滚区、滞留区、泡沫与泡沫混合液混合区、致密泡沫区、泡沫混合液区。流体向下游流动过程中持续发泡;为防止管路结冰,需合理控制泡沫混合液与液氮流量。